true
21057585
Panasonic PT-EW730ZLE. Projector brightness: 7500 ANSI lumens, Projection technology: DLP, Projector native resolution: WXGA (1280x800). Service life of lamp: 3000 h, Bulb power: 400 W, Lamp type: UHM. HDMI connector type: Full-size, Serial interface type: RS-232. Ethernet LAN data rates: 10,100 Mbit/s. Noise level: 37 dB, Noise level (economic mode): 29 dB, Vertical scan range: 24 - 120 Hz ...
The Daylight View Basic Function Ensures Clear Images Even in Brightly Lit Rooms
Panasonic‘s Daylight View Basic technology achieves sharp, easy-to-see images by clearly reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms. A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone color and brightness level according to the surrounding illumination.
Color Adjustment Function
A color adjustment function allows you to easily correct for slight variations in the color reproduction range of individual units set up for multiple projection, particularly in side-by-side configuration. Correction is performed on 3 colors (R, G, B) or 7 colors (R, G, B, C, M, Y, W).
Also Supports Other Manufacturers’ Peripheral Equipment
DIGITAL LINK is an original function added to HDBaseT™ technology. Signals from the ET-YFB100G can also be relayed to a non-DIGITAL LINK-ready projector by using another manufacturer’s equipment based on the same technology.*
Flexible Installation
The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility during installation. It lets you easily make adjustments with the remote control. The unit can also be rotated 360 degrees vertically. This means you can install it at any angle you want, to accommodate different installation conditions.
A Wide Selection of Optional Lenses
Choose from a wide lineup of optional lenses for your system, including short-throw, long-throw zoom and fixed-throw lenses for rear projection use. The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease.
A Dust-Resistant Cabinet Design and an Eco Filter that Needs No Replacement for 15,000 Hours
The cabinet is designed with a straight airflow path, from intake to exhaust.
The shielding of the lens section, where dust is likely to enter, has been further improved to keep dust out. And the sealing performance of the air filter unit and air intake duct has been increased to prevent the entry of dust from the filter periphery, resulting in a highly dust-resistant structure.
The Eco Filter unit, which efficiently captures dust in the intake airflow path, requires no replacement for up to15,000 hours.* This large, pleated Micro Cut Filter (electrostatic filter) uses an ion effect to trap minute dust particles, further raising the overall dust-trapping capability.
These features minimize the entry of dust into the optical block and maintain brightness over a long period of time, while reducing the hassle of maintenance. Also, in addition to achieving a long replacement cycle, the Eco Filter can be washed with water** and reused as an environmental consideration.
Intelligent Lamp Control System Reduces Power Consumption
When the lamp power is set to Auto, the Intelligent Lamp Control system automatically adjusts the lamp output in accordance with the brightness of the projected image and reduces it by up to 58 %*. It also combines with color shift correction, which corrects the shift in the color balance that occurs when the lamp output drops. As a result, power consumption is effectively reduced while excellent color reproduction is maintained.
Eco Management Functions
A number of functions are provided to reduce power consumption. They adjust the brightness according to ambient light conditions, and reduce the lamp power when there is no signal input. You can easily set the Eco Management functions according to operating conditions by using the ECO button on the remote control.
Easy Lamp and Air Filter Replacement
For easy maintenance, you can replace the filter from the side and the lamp from the top of the projector.
The filter and lamp are easily replaced even afte
Plus>>>
Panasonic PT-EW730ZLE
Panasonic PT-EW730ZLE, 7500 ANSI lumens, DLP, WXGA (1280x800), 5000:1, 16:10, 1016 - 10160 mm (40 - 400")
LCD, 16:10, 1280 x 800, 400 W UHM, 40 - 1016 cm (400") , 7000 lm, 5000:1, DVI-D, HDMI, DisplayPort, D-Sub x 2, SERIAL, LAN, 37 dB
Panasonic PT-EW730ZLE. Projector brightness: 7500 ANSI lumens, Projection technology: DLP, Projector native resolution: WXGA (1280x800). Service life of lamp: 3000 h, Bulb power: 400 W, Lamp type: UHM. HDMI connector type: Full-size, Serial interface type: RS-232. Ethernet LAN data rates: 10,100 Mbit/s. Noise level: 37 dB, Noise level (economic mode): 29 dB, Vertical scan range: 24 - 120 Hz ...
The Daylight View Basic Function Ensures Clear Images Even in Brightly Lit Rooms
Panasonic‘s Daylight View Basic technology achieves sharp, easy-to-see images by clearly reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms. A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone color and brightness level according to the surrounding illumination.
Color Adjustment Function
A color adjustment function allows you to easily correct for slight variations in the color reproduction range of individual units set up for multiple projection, particularly in side-by-side configuration. Correction is performed on 3 colors (R, G, B) or 7 colors (R, G, B, C, M, Y, W).
Also Supports Other Manufacturers’ Peripheral Equipment
DIGITAL LINK is an original function added to HDBaseT™ technology. Signals from the ET-YFB100G can also be relayed to a non-DIGITAL LINK-ready projector by using another manufacturer’s equipment based on the same technology.*
Flexible Installation
The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility during installation. It lets you easily make adjustments with the remote control. The unit can also be rotated 360 degrees vertically. This means you can install it at any angle you want, to accommodate different installation conditions.
A Wide Selection of Optional Lenses
Choose from a wide lineup of optional lenses for your system, including short-throw, long-throw zoom and fixed-throw lenses for rear projection use. The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease.
A Dust-Resistant Cabinet Design and an Eco Filter that Needs No Replacement for 15,000 Hours
The cabinet is designed with a straight airflow path, from intake to exhaust.
The shielding of the lens section, where dust is likely to enter, has been further improved to keep dust out. And the sealing performance of the air filter unit and air intake duct has been increased to prevent the entry of dust from the filter periphery, resulting in a highly dust-resistant structure.
The Eco Filter unit, which efficiently captures dust in the intake airflow path, requires no replacement for up to15,000 hours.* This large, pleated Micro Cut Filter (electrostatic filter) uses an ion effect to trap minute dust particles, further raising the overall dust-trapping capability.
These features minimize the entry of dust into the optical block and maintain brightness over a long period of time, while reducing the hassle of maintenance. Also, in addition to achieving a long replacement cycle, the Eco Filter can be washed with water** and reused as an environmental consideration.
Intelligent Lamp Control System Reduces Power Consumption
When the lamp power is set to Auto, the Intelligent Lamp Control system automatically adjusts the lamp output in accordance with the brightness of the projected image and reduces it by up to 58 %*. It also combines with color shift correction, which corrects the shift in the color balance that occurs when the lamp output drops. As a result, power consumption is effectively reduced while excellent color reproduction is maintained.
Eco Management Functions
A number of functions are provided to reduce power consumption. They adjust the brightness according to ambient light conditions, and reduce the lamp power when there is no signal input. You can easily set the Eco Management functions according to operating conditions by using the ECO button on the remote control.
Easy Lamp and Air Filter Replacement
For easy maintenance, you can replace the filter from the side and the lamp from the top of the projector.
The filter and lamp are easily replaced even afte
Plus>>>
Specifications
Options
Quality comment
Please provide your email and comment